|
|
1/4 WAVE AIRBAND ANTENNA |
|
|
Designed to be mounted on a pod or fuselage
|
||||||||
|
ANT-127 |
|||||||||
 |
The stainless steel
whip is demountable from whip base for de-rigging or storage. (10 seconds mount/de-mount time) |
|
The feeder cable is detachable from the water tight antenna base and is supplied 2m long unless specified otherwise. Extra coax £1/m | ||||||
|
The whip is easily adjusted for length via a grub screw giving 12mm (1/2in) movement. | |
50 ohm coax feeder 100% double screened with Mylar foil & copper braid. | ||||||
|
Supplied with self-adhesive foil ground plane for use on non-metallic surfaces. | |
Crimp connection BNC plug unless specified alternative 90 degree screw/crimp (removable) | ||||||
|
Wire ground plane (rigid or flexible) can be supplied as alternative to foil for 3-axis a/c. | |
As supplied to Turkish Airlines for their airport ground support vehicles. | ||||||
| Option 1 (cut to length) popular choice | Option 2 (cut oversize) | ||||||||
| The
whip can be supplied ready cut to 570mm (1/4 wave length at 127 mHz). This will give very
good results but may not be optimum. See Antenna Fitting Instructions page. |
The whip can be supplied over-length (650mm) for optimum SWR tuning. Requires access to an SWR meter. See Antenna SWR tuning page. |
||||||||
|
Antennas will be supplied option 1 'cut to length' unless specified option 2 'oversize' |
|||||||||
|
|
|||||||||
|
|
|||||||||
