Prices & Products

Flying Helmet
FH-1V	Helmet for open cockpit flying complete with avionics and clear visor FV-1 (see below for visor options). BSI tested and CE certified to EN 966:1996 Helmets for Airborne Sports (UL) Contains integral noise-canceling headset (non removable) based on Peltor H520F hearing defenders, now with improved mike and moisture proof speakers. All GRP outer shell. Complete with FV-1 visor, helmet bag and neck roll. Weight 1660g.						295.00

FH-1	Helmet (as FH-1V) without visor for closed cockpit flying. Not recommended for open cockpit flying. Weight 1420g.						243.00

Visor Options
FV-1 NEW	Replacement clear visor (for FH-1V) with HD Polyethylene / neoprene chin guard. Now flexible and will not crack, complete with security kit consisting of machine screws, washers and spacers. Weight 240g BSI tested and CE certified to meet relevant parts of: EN 166:2001 Personal Eye Protection BS4110:1979 Eye Protectors for Vehicle Users. Kitemarked BS4110ZA Allows 89% visible light transmission. Blocks 97% UV light.						52.00

FV-1-T50 NEW	Tinted version FV-1 (certified as FV-1). Daylight use only. Weight 240g Neutral tint allows 50% visible light transmission. Blocks 100% UV light.						55.00

FV-1-T20 NEW	Tinted version FV-1. Meets impact requirements of BS 4110ZA (not Kitemarked) Sunglasses quality (for that 'bad boy' look). Daylight use only. Weight 240g Darker neutral tint allows 20% visible light transmission. Blocks 100% UV light.						55.00

JFV-1 NEW	Bob Heath 'Jet Flip' clear visor (standard visor with no chin guard additions) Kitemarked BS 4110ZA. Weight 200g Allows 89% visible light transmission. Blocks 97% UV light.						25.00

JFV-1-T50 NEW	Tinted version of JFV-1. (standard Bob Heath visor with no chin guard additions) Kitemarked BS 4110ZA. Weight 200g Neutral tint allows 50% visible light transmission. Blocks 100% UV light.						28.00

JFV-1-T20 NEW	Tinted versions of JFV-1. (standard Bob Heath visor with no chin guard additions) Meets impact requirements of BS 4110ZA (not Kitemarked) Weight 200g. Darker neutral tint allows 20% visible light transmission. Blocks 100% UV light.						28.00

Helmet Accessories
HB-1	Fleece helmet bag.	Free with helmet FH-1V					8.00

NR-1	Neck roll. double layer polar fleece.	Free with helmet FH-1V					6.00

Intercoms
Mk1-BB	Black box Intercom. Can be interfaced with any make of radio (see below) When used without radio the patch lead is replaced with a simple fused power lead. Weight 90gm.						80.00

Mk2-3/22	Slide-on intercom integral with ICOM A3/A22 (Fits like a battery pack) Integral patch lead, on-board PTT, remote PTT socket, power socket. Bottom entry helmet/headset sockets. Still the neatest comms package you can buy with an A3 or A22 radio.						105.00

Solo interfaces
PTT-IF-AB	PTT/interface for airband radios A3/22 and later.						48.00

PTT-IF-PMR	PTT/interface for PMR radios and airband radios A2/20 and earlier.						32.00

Intercom Accessories/Options
PTT-1C	Plug-in PTT. Coiled lead, Velcro fitting. Fits trike base bars and joysticks up to 50mm (2") diameter. Longer Velcro straps by request. Supplied with phono plug or DIN plug depending on intercom.						20.00

PTT-1S	Plug-in PTT for ICOM A2, A20, A3 and A22. Straight, any length						15.00

PTT-2S	As above but mounted in plastic washer* for fitting into the top of the joystick rubber grip (not supplied) *Washer can be trimmed to size with scissors or snips.						16.00

MPI-Mk1/2	Mobile (cell) phone interface, built into the intercom case. See Mobile (cell) Phone Interfaces below.						45.00

AUDIO-IN	Extra socket and lead to allow music input. Lead terminates with 3.5mm jack.						15.00

AUDIO-OUT	Extra socket and lead to allow recording. Lead terminates with 3.5mm jack.						15.00

COR-1	Change-over relay added to circuit board enables either left socket or right socket to transmit depending on which PTT is pressed. Price includes an extra socket on the Mk-2 intercom for second PTT or dual PTT plug on the Mk1-BB. The other mike automatically mutes during the transmission. Highly recommended for R/T training since P1 (instructor) can override P2 (student) but P2 cannot override P1.						22.00

COS-1	P1 selector (P1/P2 change-over) switch fitted to any intercom. Selected P1 overrides and mutes P2 (the other mike) during transmissions. Ideal for sharing the radio work. (P2 cannot transmit until he selects P1)						18.00

HA-1	Headset adaptor, Standard twin GA jacks to FLYCOM 1/4" jack. (Allows GA headsets to be used with FLYCOM Intercoms)						27.50

HA-2	Headset adaptor, FLYCOM 1/4" jack to Standard twin GA jacks. (Allows FLYCOM HS-1 to be used with GA Intercoms)						27.50


Helmet and headset extension leads
ELS-S1L	1m straight cable, straight plug, in-line socket.						5.00

ELS-S2L	2m straight cable, straight plug, in-line socket.						6.00

ELS-A1L	1m straight cable, 90 degree plug, in-line socket.						5.00

ELS-A2L	2m straight cable, 90 degree plug, in-line socket.						6.00

ELS-A1P	1m straight cable, 90 degree plug, panel socket.						5.00

ELS-A2P	2m straight cable, 90 degree plug, panel socket.						6.00

ELC-S6L	6m (extended) coiled cable, straight plug, in-line socket. .						6.00

ELC-A6L	6m (extended) coiled cable, 90 degree plug, in-line socket.						7.00

	Custom lengths by request.

Mobile (cell) Phone Interfaces
MPI-Mk1/2	Mobile (cell) phone interface, built into the intercom case. No external boxes. Price includes adaptor lead (phone > intercom). Incoming phone calls ring in the headsets while using the radio or intercom. Flick the switch to enable P1 to use the phone and at the same time totally isolate the radio and intercom. Available as a retro-fit modification to your intercom.						45.00

MPI-L1	Headset > phone adaptor lead. Effectively turns your Flycom headset or helmet into a hands-free extension to your mobile (cell) phone. Incoming phone calls ring in the headset. NB. This adaptor lead is not an interface to a radio or intercom, just to a phone.						15.00

MPI-X2	Connects both headset leads to the intercom and phone via external box. Incoming phone calls ring in the headset while using the radio or intercom. All features of MPI-Mk1/2 plus dual helmet lead extensions and phone interface.						55.00

	These interface leads terminate at the phone end with a 2.5mm 3-way jack (as used on a Plantronics mobile phone headset) and plug into the required 'hands free' base adaptor relevant to your phone. (price of adaptor varies with phone model) Prices do not include this base adaptor.* *State your phone model when ordering.

Patch leads for Mk1 intercom (audio to/from radio) 2m long (default) shorter by request.
PL-2/20	To fit ICOM A2 & A20 straight entry (3.5mm / 2.5mm jacks)						22.00

PL-3/22	To fit ICOM A3 & A22 straight entry (3.5mm / 2.5mm jacks)						22.00

PL-4	To fit ICOM A4 straight entry (3.5mm / 2.5mm jacks)						22.00

PL-5/23	To fit ICOM A5 & A23 straight entry (single 3.5mm 4 pole jack)						25.00

PL-6/24	To fit ICOM A6 & A24 angled entry (3.5mm / 2.5mm jacks)						22.00

PL-vertex	To fit Vertex handhelds with screw-in headset adaptors.						25.00

PL-M760	To fit Microair 760 (incorporates 3A red/black power cable)						31.50

PL-X760	To fit X-com 760 (incorporates 3A red/black power cable)						31.50

ICOM Airband Transceivers (require FRTO licence)
IC-A6 sport pack	Transceiver comes with BP208-N AA battery case (cells not included), CP-20 cigarette lighter power cable with DC-DC converter, MB-103 belt clip, FA-B02AR flexible antenna, handstrap and manual.						150.00

IC-A6 pro pack	Transceiver comes with BP210-N Ni-MH battery pack, OPC-499 headset adaptor, BC-119N rapid desktop charger, AD-101 charger adaptor, CP-20 cigarette lighter power cable with DC-DC converter, MB-103 belt clip, FA-B02AR flexible antenna, handstrap and manual.						225.00

IC-A24 sport pack	Transceiver comes with BP208-N AA battery case (cells not included), CP-20 cigarette lighter power cable with DC-DC converter, MB-103 belt clip, FA-B02AR flexible antenna, hand strap and manual.						195.00

IC-A24 pro pack	Transceiver comes with BP210-N Ni-MH battery pack, OPC-499 headset adaptor, BC-119N rapid desktop charger, AD-101 charger adaptor, CP-20 cigarette lighter power cable with DC-DC converter, MB-103 belt clip, FA-B02AR flexible antenna, hand strap and manual.						270.00

IC-A110	Transceiver comes with hand mike, mobile mounting bracket kit, DC power cable and manual.						487.00

ICOM PMR transceivers (Licence free)
IC-4088SR	PMR446 Handheld FM transceiver. Supplied with wall charger, 4 x AA rechargeable cells and a handbook. Full specification, options & accessories						75.00

IC-4088SR consumer	PMR446 Handheld FM transceiver. Supplied with MW1298 wall charger, 4 x AA rechargeable cells and a handbook. Full specification, options & accessories						77.00

IC-4088SR commercial pair	PMR446 Handheld FM transceiver. Commercial option includes 2 x BP-202 battery packs, 1 x BC-119LM fast charger and adaptor, 1 x BC-06 mains PSU for charger. Full specification, options & accessories						198.00

IC-F25SR NEW	PMR446 Handheld FM transceiver. Supplied with a BC-160 rapid charger, BC 145 charger adaptor, BP-232N Li-Ion battery pack, antenna, MB-68 belt clip and a handbook. 5% lighter than IC-F22SR Full specification, options & accessories						116.00

IC-F22SR	PMR446 Handheld transceiver. Supplied with a BC-146 Drop-in charger, BP-222 Ni-Cad battery pack, antenna, MB-68 belt clip and a handbook. Full specification, options & accessories						115.00

IC-F22SR 6-pack	PMR446 Handheld transceiver. Supplied with a BC-146 Drop-in charger, BP-222 Ni-Cad battery pack, antenna, MB-68 belt clip and a handbook. Includes 6 transceivers. Full specification, options & accessories						1018.00

ICOM radio receivers
IC-R3	Audio visual receiver comes with FA-BO3RE antenna, belt clip, battery spacer, BP-206 battery pack, and BC-07 wall charger.						345.00

IC-R5	Compact handheld receiver comes with BC-07 UK battery charger, 2 x AA rechargeable batteries, FA-270C antenna, belt clip, handstrap and handbook.						135.00

IC-R20	Handheld receiver comes with BC-07 charger, BP-206 Li-ion battery pack, MB-98 belt clip, handstrap, antenna and handbook.						299.00

IC-PCR1500	PC Communication receiver comes with BC-1A power supply, control softwear (CD), antenna and USB cable.						307.00

IC-R1500	Communication receiver comes with BC-1A power supply, controller, 3.4m controller cable, control softwear (CD), antenna and USB cable.						348.00

IC-PCR2500	Communication receiver comes with BC-1A AC adaptor, control softwear (CD), antenna and USB cable.						397.00

IC-R2500	Communication receiver comes with BC-1A AC adaptor, controller, 3.4m controller cable, control softwear (CD), antenna and USB cable.						442.00

Air-band Antenna
ANT-127	1/4 wave stainless-steel whip antenna. Whip is easily mounted/demounted from waterproof antenna base, suitable for pod or fuselage mounting. 50 ohm coax feeder 100% double screened with Mylar foil & copper braid. Cable supplied 2m unless specified otherwise. Feeder connects/disconnects quickly and easily by hand. No tools required. Self-adhesive foil ground plane or wire ground plane. Option 1 cut 127 MHz (default). Option 2 cut oversize for self tuning.						25.00

CO-AX	Above price includes 2m co-axial feeder cable. For longer cables add						1.00/m

Batteries (lead-acid)
Sealed 12 volt lead/acid batteries. Will not spill in any attitude. Maintenance-free. 5 year life (dependent on duty cycle)		weight	size (mm)			capacity
		Kg	H	W	L	Ah
BAT-12/1.3		0.6	52	45	97	1.3	9.95
BAT-12/2.2	Popular for radio / intercom use	1.0	60	34	178	2.2	11.95
BAT-12/3.3		1.25	61	67	134	3.3	14.95
BAT-12/7.2		2.6	95	65	150	7.2	19.95
BAT-12/12		4.0	95	97	150	12	24.95
BAT-12/18		6.0	167	76	180	18	27.25
BAT-12/26		9.0	125	165	174	26	34.00
BAT-12/33		12.3	171	164	196	33	47.65
BAT-12/44		14.0	171	164	196	44	56.15

Battery chargers and power leads
PLF-750	Power lead with in-line 3A fuse holder and spade terminals. Length 750mm unless requested otherwise, e.g. PLF-1500 (1.5m long)						6.50

LC-750	Power lead with fused cigarette lighter plug and LED indicator. Length 750mm unless requested otherwise, e.g. PLC-1500 (1.5m long)						7.50

PLP-750	Power lead, plain. Spade terminals on plain wire supplied with bare ends. Length 750mm unless requested otherwise						3.50

MC-240	Mains 3-pin, plug-in (240vac 13W) battery charger for 'gel' batteries. Trickle charge regulated 13.8v dc.						11.00

FLYCOM avionics Ltd reserves the right to change prices and specifications without notice.
EU customers add 17.5% VAT. Non EU customers pay ex VAT prices shown
Delivery from £3.00 per order.

[ Home ] [ Flying Helmet ] [ Headset ] [ Intercoms ] [ PTT Switch ] [ Antenna ] [ Batteries ] [ Solo Interfaces ] [ Phone interfaces ] [ Noise & Hearing ] [ Waveforms ] [ Album 2001 ] [ User Information ] [ Links ] [ Testimonials ] [ Trouble shooting ] [ Access Codes & Time Zones ] [ Let me call you ] [ Prices & Products ] [ Order form ]