FLYCOM |
 |
|
SOLO PTT INTERFACES |
| Paramotor pilot PTT Interface | |||||
|
|
This
PTT interface provides paramotor pilots and other solo pilots with a
direct PTT interface to non-airband,
licence-free radios using the FLYCOM flying helmet and PMR transceivers such
as IC-4088SR (shown left). |
||||
|
£32.00 |
|||||
|
ICOM IC-4088SR PMR 446 tranceiver |
|
 |
|||
|
see product review #1 on www.paramotorsuk.co.uk |
|||||
| The
Paramotor PTT interface is shown (above right) with the FLYCOM flying
helmet lead un-plugged in the top R/H side. The radio patch lead is coiled
and
has twin jacks to the radio external speaker/mike sockets. Complete lack of background noise through the mike in standby (Rx) mode. |
l |
Suitable for all radios which accepts an external hand speaker/mike including all PMR or PBR or walkie-talkie transceivers including the older A2, A20 transceivers. | |||
|
l |
Side tone provided by your radio if available. (No side tone on older A2 and A20 radios) | ||||
| l | PTT is a momentary toggle switch for positive action and uses double sided Velcro for fixing. | ||||
|
l |
Paramotor customers are advised to order a FLYCOM flying helmet with a short helmet lead. | ||||
| Solo pilot PTT Interface | |||||
|
This PTT
interface provides solo pilots with a direct PTT interface to airband radios
with 150 ohm (low impedance) mike inputs like the IC-A6E |
|||||
|
£48.00 |
|||||
|
The Solo PTT interface is shown (right) with the FLYCOM flying
helmet lead un-plugged in the top R/H side. The radio patch lead is coiled
and
has twin jacks to the radio external speaker/mike sockets. The interface is a modified ICOM HM-112 hand speaker/mike and has a rotating belt clip for mounting in any attitude. In this adaptation the original usage as a hand speaker/mike is disabled. |
 |
||||
|
ICOM IC-A6E (sport) airband transceiver Available in 'sport' and 'pro' pack options. Check Prices for other ICOM radios |
 |
l |
The interface contains circuitry which is self powered from the radio (no batteries required) | ||
| l | It perfectly matches the Flycom helmet or headset to radios with low impedance (150 ohm) mike inputs. | ||||
| l | This is suitable for ICOM A3, A22, A6, A24 transceivers.Complete lack of background noise through the mike in standby (Rx) mode. | ||||
| l | PTT switch situated on the side of the case. | ||||
|
|
|||||